Данные и диски

Parted Magic 2012.10.10

Parted Magic

Parted Magic - пакет утилит для работы с разделами жесткого диска на базе загрузочного CD Linux. Позволяет производить различные операции над разделами и поддерживает большое количество файловых систем.

В состав Parted Magic входят следующие программы:

  • GParted - редактор разделов
  • Partition Image - инструмент для работы с образами дисков
  • TestDisk - инструмент для восстановления загрузочных записей
  • fdisk, sfdisk - редакторы таблицы разделов
  • dosfstools - утилита для создания и проверки целостности разделов FAT
  • ntfsprogs - инструмент для работы с разделами NTFS
Parted Magic

Всего в состав Parted Magic входят 70 различных утилит для проверки состояния дисков, мониторинга, копирования, архивации данных. Поддерживаются файловые системы ext2, ext3, ext4, fat16, fat32, hfs, hfs+, jfs, linux-swap, ntfs, xfs, reiserfs, reiser4. Загрузка Parted Magic может осуществляться с CD, USB-диска или по сети.


Programs

Partition programs
  • cfdisk - curses-based disk partition table manipulator
  • fdisk - partition table manipulator
  • gdisk - text-mode partitioning tool that works on GPT disks
  • gpart - guess PC-type hard disk partitions
  • GParted - partition editor that uses libparted
  • parted - partition manipulation program
  • sfdisk - partition table manipulator

File System Tools
  • btrfs - btrfs is a new copy on write file system for Linux
  • Bonnie++ - benchmark suite aimed at performing a number of simple tests
  • curlftpfs - file system for accessing FTP hosts based on FUSE and libcurl
  • dbench - file system benchmark
  • diskdev_cmds - OSX-ported, HFS+ utilities supplying mkfs and fsck
  • dosfstools - utilities to create and check MS-DOS FAT file systems
  • e2fsprogs - ext2 file system utilities and libraries
  • EncFS - provides an encrypted file system in userspace
  • fsarchiver - save contents of a file system to a compressed archive file
  • FUSE - file system in userspace
  • hfsplus - set of tools to access HFS+ file systems
  • IOzone - file system benchmark tool
  • ntfs-3g - third generation NTFS driver
  • ntfsprogs - tools for doing neat things with NTFS
  • reiser4progs - administration utilities for Reiser4 file systems
  • reiserfsprogs - user-level tools for ReiserFS file systems
  • sshfs - file system client based on SSH
  • vmfs-tools - access VMFS through standard Linux VFS via FUSE
  • xfsprogs - utilities for managing XFS file systems

Booting Loader Tools
  • grub - GRand Unified Bootloader
  • HDT (Hardware Detection Tool) - Syslinux com32 hardware analyzer module
  • install-mbr - installs and configures a Master Boot Record manager
  • lilo - LInux LOader
  • Memtest86+ - advanced memory diagnostic tool
  • ms-sys - used to create Microsoft-compatible boot records
  • syslinux - bootloaders for FAT12/16/32, bootable “El Torito” (iso9660), ext2/3/4 and brtfs file systems

X Utilities
  • Firefox - open source web browser
  • Conky - lightweight system monitor
  • emelFM2 - GTK+2 port of file manager emelFM
  • ePDFView - lightweight PDF document viewer
  • File Roller - archive manager
  • galculator - GTK+ scientific calculator
  • GEncFS - GUI to EncFS, for encrypted directory mounting
  • GPicView - GTK+ image viewer
  • gtk-lshw - GTK+ front-end for lshw
  • GSmartControl - HDD health inspection tool (GUI for smartctl)
  • GSSHFS - GUI to SSHFS, for distant directory over SSH mounting
  • hardinfo - system profiler and benchmark
  • ISO Master - GUI CD image editor
  • Mount-gtk - front end for pmount
  • Leafpad - GTK+ based simple text editor
  • LXMusic - minimalist music player for LXDE
  • LXTerminal - VTE-based terminal emulator for LXDE
  • PCman FM - file manager
  • SimpleBurn - CD burning GUI
  • TrueCrypt - software system for on-the-fly-encrypted volumes
  • UNetbootin - create bootable, Live USB drives for Linux distros without burning a CD
  • XChat - IRC chat program

Console Utilities
  • BlueZ - official Linux Bluetooth protocol stack
  • bzip2recover - recover data from damaged bz2 files
  • cdrtools - allows recording to CD/DVD/BluRay media
  • chntpw - utility to (re)set passwords of local accounts on Windows systems
  • cmospwd - decrypts passwords stored in CMOS used to access BIOS setup
  • ClamAV - open source (GPL) anti-virus toolkit for UNIX
  • Clonezilla - OpenSource clone system
  • cURL - tool for transferring files with URL syntax
  • dcfldd - enhanced version of GNU dd
  • dc3dd - patched version of GNU dd
  • dd - convert and copy a file
  • ddrescue - does not abort on errors on the input file
  • device-mapper - kernel component that supports LVM
  • di - disk information utility
  • diff - compares two files, showing differences line by line
  • disktype - detect content format of disk or disk image
  • dmidecode - reports information about your system's hardware
  • dmraid - discover and activate software (ATA)RAID
  • DRBL - Diskless Remote Boot in Linux
  • ELinks - text mode web browser
  • ext3grep - recover deleted files from an ext3 or ext4 file systems
  • extundelete - tool to help recover deleted files on ext3 file systems
  • file - determine file type
  • flashrom - identify, read, write, verify, erase flash chips
  • hdparm - get/set ATA/SATA drive parameters
  • hexedit - view and edit files in hexadecimal
  • lftp - command-line file transfer program
  • lm-sensors - Linux hardware monitoring
  • lshw - Hardware Lister
  • lsof - (LiSt Open Files) displays information about files open to processes
  • lspci - lists PCI buses and devices in the system
  • lsscsi - lists information about SCSI devices
  • lsusb - lists USB devices
  • lzip - gzip-like command line tool which uses LZMA compression
  • mdadm - manage MD devices, aka Linux Software Raid
  • Midnight Commander - file manager
  • multipath-tools - used to drive the Device Mapper multipathing driver
  • myrescue - rescue still-readable data from a damaged harddisk
  • nano - editor aimed to replace Pico
  • Nwipe - run the DBAN dwipe command outside of DBAN
  • openSSH - encrypt sessions using the SSH protocol
  • openSSL - open source implementation of the SSL and TLS protocols
  • partclone - a project similar to the well-known backup utility
  • partimage - utility which saves partitions to an image file
  • PhotoRec - digital photo recovery
  • pigz - parallel implementation of gzip that exploits multiple processors & cores
  • pmount - permits removable device mounting without matching /etc/fstab entry
  • pv - monitors the progress of data through a pipeline
  • RP-PPPoE - PPPoE client for Linux to connect to PPPoE service providers
  • rsync - fast incremental file transfer
  • rTorrent - text-based ncurses BitTorrent client
  • safecopy - data recovery tool
  • Scrounge NTFS - data recovery program for NTFS
  • sdparm - outputs and modifies SCSI device parameters
  • shred - securely delete a file
  • smartctl - control and monitor utility for SMART disks
  • stress - simple workload generator
  • TestDisk - partition scanner and disk recovery tool
  • TightVNC-viewer - remote control software package for connecting to a vnc server
  • UDPcast - transfer tool that can multicast data on a LAN
  • unarj - program used to uncompress .arj format archives
  • wpa_supplicant - implementation of an IEEE 802.11i supplicant
  • wipe - secure, file wiping utility

Что нового в версии 2012.10.10:

  • Updated Python-2.7.3, bzip2-1.0.6, dbus-python-1.1.0, libgpg-error-1.10, mesa-9.0, nmap-6.01, notify-python-0.1.1, pixman-0.27.2, py2cairo-1.8.10, pygobject-2.28.6, pygtk-2.24.0, pyneighborhood-0.5.4, smartmontools-6.0, wicd-1.7.2.4, gparted-0.14.0. Improvements made to /usr/bin/pmagic_firewall.
  • Updated firefox-16.0. Removed rdesktop. Added freerdp-1.0.1, libssh-0.5.2, Remmina-1.0.0.
  • Updated ethtool-3.6, linux-3.5.6. Fixed /usr/bin/pmagic_download_flashplayer to reflect new flash player download name.
  • Updated gnome-ppp-0.3.23-1.2, libtorrent-0.13.0, rtorrent-0.9.0, wvdial-1.61, wvstreams-4.6.1, zfs-fuse-20120201_6abfdcf.
  • Added ClamAV-Scan.spacefm-plugin and MountShare.spacefm-plugin plugins for SpaceFM.
  • Updated xf86-input-acecad-1.5.0, xf86-input-aiptek-1.4.1, xf86-input-evdev-2.7.3, xf86-input-joystick-1.6.1, xf86-input-keyboard-1.6.2, xf86-input-mouse-1.8.1, xf86-input-penmount-1.5.0, xf86-input-synaptics-1.6.2, xf86-input-vmmouse-12.9.0, xf86-input-void-1.4.0, xf86-input-wacom-0.15.0, xf86-video-apm-1.2.5, xf86-video-ark-0.7.5, xf86-video-ast-0.97.0, xf86-video-ati-6.14.6, xf86-video-chips-1.2.5, xf86-video-cirrus-1.5.1, xf86-video-dummy-0.3.6, xf86-video-geode-2.11.13, xf86-video-glint-1.2.8, xf86-video-i128-1.3.6, xf86-video-i740-1.3.4, xf86-video-intel-2.20.9, xf86-video-mach64-6.9.3, xf86-video-mga-1.5.0, xf86-video-modesetting-0.5.0, xf86-video-neomagic-1.2.7, xf86-video-nouveau-1.0.2, xf86-video-nv-2.1.20, xf86-video-openchrome-0.3.1, xf86-video-r128-6.9.1, xf86-video-rendition-4.2.5, xf86-video-s3-0.6.5, xf86-video-s3virge-1.10.6, xf86-video-savage-2.3.6, xf86-video-siliconmotion-1.7.7, xf86-video-sis-0.10.7, xf86-video-sisusb-0.9.6, xf86-video-tdfx-1.4.5, xf86-video-tga-1.2.2, xf86-video-trident-1.3.6, xf86-video-tseng-1.2.5, xf86-video-v4l-0.2.0, xf86-video-vesa-2.3.2, xf86-video-vmware-12.0.2, xf86-video-voodoo-1.2.5, xf86-video-xgixp-1.8.1, xorg-server-1.13.0.
  • Removed gcin and scim. Very few people are using these, if any. If you still want to use them I would suggest the slackware-13.37 scim packages and the gcin deb from sid. Fixed delete key in vte terminals.
  • Added reiser4progs-1.0.7, libaal-1.0.5. Kernel patched with upstream reiser4-for-3.5.3.patch.
  • Updated hdparm-9.42. Added 1280×768 to Xvesa and Xorg configure scripts.
  • Updated cryptsetup-1.4.3, libcap-2.22, libgcrypt-1.5.0, pcre-8.12.
  • Updated ncurses-5.9. This long overdue update stopped crashes in some ncurses based programs. Made default terminal size bigger.
  • Updated ncdu-1.9. Updated upstream GParted locales from git.
  • Updated nwipe-0.11, e2fsprogs-1.42.6, libdrm-2.4.39, xf86-video-ati-6.14.6, xf86-video-intel-2.20.8, xf86-video-nouveau-1.0.2.
  • Load the ahci module in the proper place in /init.
  • Updated systemd-190. More fixes for Parted Magic Report. Load the ahci module at boot. noahci cmdline option disables it.
  • Updated lilo-23.2. Added a new script called /usr/bin/pmagic_report. The desktop file adds “Parted Magic Report” to the Help menu. This is designed to help us with bug reports.
  • Updated linux-3.5.4, clamav-0.97.6, dhcp-4.2.4-P2, hdt-0.5.2, spacefm-0.8.0, udevil-0.3.3.

 

Скачать программу Parted Magic 2012.10.10 (236,0 МБ):

Теги freeware, менеджеры разделов жесткого диска
aks85 11/10/12 Просмотров: 1536
0